I have a VMware workstation 10.0.3. With this I use an external NIC (not the laptops built in NIC). The reson for this is that my IT dep has made a setting in bios that if LAN is connected, WIFI is disabled. This setting is however not valid when using an external NIC.

So when running the VMware I can connect to the equipment that is on the network. But I have to make sure that the network cable is connected BEFORE I start VMware. If I disconnect and reconnect the the network cable after VMware is started I am unable to re-establish the connection. The only way is to restart VMWare. I have tried to disable/enable the external NIC on the host. At first I thought I had "solved" the connection issue but the connection is lost after some 10-20 seconds. The resason why I disconnect the network cable is because I have several networks that I need to test equipment on and these cannot be connected to the same network. I have tried both with a PCMCIA and a USB NIC, but no difference. Why is this happening?

I have a problem with Workstation 12.5 or 12.5.1 on my pc.

I installed a fresh installation of Windows 10 Pro x64 1607 on my Dell Optiplex 3010.

The installation of vmware workstation 12.5.1 terminated without problem but when I start the application I receive an error.

| vmui| I125: Msg_Post: Error

| vmui| I125: [msg.log.error.unrecoverable] VMware Workstation unrecoverable error: (vmui)

| vmui| I125+ Exception 0xc0000005 (access violation) has occurred.

| vmui| I125: [msg.panic.haveLog] A log file is available in "C:\Users\Popi\AppData\Local\Temp\vmware-Popi\vmware-ui-5624.log". 

| vmui| I125: [msg.panic.requestSupport.withoutLog] You can request support. 

| vmui| I125: [msg.panic.requestSupport.vmSupport.windowsOrLinux]

| vmui| I125+ To collect data to submit to VMware support, choose "Collect Support Data" from the Help menu.

| vmui| I125+ You can also run the "vm-support" script in the Workstation folder directly.

| vmui| I125: [msg.panic.response] We will respond on the basis of your support entitlement.

| vmui| I125: ----------------------------------------

| vmui| W115: Exception caught; trying to exit app.

| vmui| I125: CDS: Clearing the credentials cache.

| vmui| I125: CDS: Clearing the credentials cache.

| vmui| I125: WORKER: asyncOps=0 maxActiveOps=0 maxPending=0 maxCompleted=0

| vmui| I125: DictionaryLoad: Cannot open file "C:\Users\Popi\AppData\Roaming\VMware\inventory.vmls": Unknown error 2 (0x2).

| vmui| I125: FILE: FileDeletionRetry: Non-retriable error encountered (C:\Users\Popi\AppData\Roaming\VMware\inventory.vmls~): Unknown error 2 (0x2) (2)

| vmui| W115: CnxMgr::~CnxMgr(): Pending connection to localhost

| vmui| I125: Exited abnormally.

I didn't have this problem with old version 12.1.1.

Could you help me?

Thanks

Hi

We have a number of staff that use the VMWare View Client across our Juniper SSL to access their VMWare View session.

The problem I have is that I'd like to enable NLA and also SSL for the encryption on the VMWare View Desktops. However if I do that the staff can't connect from home with their client and reports a 1033 error.

I know there are some ADM templates to set settings for inside a domain for the VMWare View Client but this won't be possible as they are connecting from home PC's.

Is there a work round to this issue?

We are using VMWare View Server 5.2 withthe latest agents and view clients.

Thanks

I was requested to restart the Management Agents on an ESXi 5.0 host managed by a vCenter server 5.5.

The action is described on page VMware KB: Restarting the Management agents on an ESXi or ESX host

Can I restart the Management Agents without creating problems to the running VM?

• If I restart the Management agents will running VMs go on running?
• Will users accessing the VMs thru the network go on using them?
• Will users accessing the VM consoles thru the vSphere client go on using the VMs?

Regards

marius

HI,

i want to migrate N1k DVS to the vsphere vDS.

Please update if i miss the steps

Steps:

1) Disable HA, DRS, EVC on cluster

2) Storage DRS Needs to be manual

3) Remove host one uplink from N1K

4) From Networking - > Manage Hosts -> select Physical Adapsters -> Assign Port Group

5) Migrate VM networking

Thanks

So on our windows machines we have Drive D dedicated to the pagefile. Is there a way that you can get vrops not to monitor the D: but every other drive as per the criteria thresholds?

Dear All

Hi

i want to know

1- vRealize Operations is a powefull application from vmware product for monitoring virtual machines and esxi hosts ?

2- is this application just for monitoring ?

3- can you say me what sensors can exactly monitor vrealize ?

4 - can it monitor physical servers or just can monitor virtual machines?

BR

I think this started when moving to VMware Fusion 8.  When I open my Windows 10 VM, I have to click in the Windows 10 VM for it to pick up mouse movements within the VM.  At this point the mouse acceleration seems to be controlled by Windows rather than macOS, making movement and acceleration off.

I just want things the way they were before: I command-tab into VMware, or click on it, and it starts working, with my mouse acceleration being the same as it is in the rest of macOS.  I haven't been able to figure out how to make this setting happen.

Multi-monitor Mac Mini running macOS Sierra 10.12.1.  VMware Fusion 8.5.2, Windows 10 of some sort.  Logitech MX Master mouse.

Hi,

I have problems with TWAIN scanner redirection. Scanner works on local machine, but not inside VDI.

As you can see on the screenshot the scanner is detected and selected in "scanner redirection for vmware horizon" but it is not visible under either "Devices and printers" or "Device Manager". Also if I try to scan in various applications all reports that they can not find scanner.

If select the same scanner under WIA scanner redirection, then scanning will work, but the applications see scaner as "vmware virtual wia scanner".

So here are my questions:

1) why is single scanner shown under both scanner redirection options ?

2) How to tshoot scanner redirection, especially TWAIN part. (It works on local machine)

3) How should I see scanner in VDI if it would work properly with twain scanner redirection ? Would it be shown under "Devices and printers" or inside device manager ?

4) Currently there is only "VMware virtual WIA scanner" under device manager. Should be there also "VMware virtual TWAIN scanner" ? And that this is the source of my problems ?

Tnx

Hi,

I am planning VMware HA architecture which will be located in two DC, data will be synced via DB replication (via FC). Environment is planned for ensure HA for application which is running on VM. Due to application vendor restrictions I can't install VMware Tools on VMs. Regarding to that I have a question. Can you provide stable HA solution for application on VM without installing VMware Tools? Does in case of DC failure VMs will be started in second DC? What extra functions I am losing without VMware Tools installed on VM?

I searched information about that on community portal and documentation but I didn't get clear explanation of my questions. I am planning to use VMware version 6.

I would be grateful for clarification on this topic.

Best regards.

Is there a way to push application shortcuts on the client desktop upon first login ?

To cklick on every application avaliable and select create shortcut on desktop is cumbersome for users. I know that I can manually crate icons trough GPO but this is less than ideal.

With the new version of vrealize operations manager, what is the most efficient way to get a total of transactions per second (Iops) for The storage traffic of  The sum of all virtual machines in my environment?

Hello,

My ubuntu 14.04 VM isn't seeing the entire disk for some reason. If I go into the "virtual Machine Settings" and go to the disk, here's what it says:

Capacity

Current size: 3.9 GB

System free: 373.2 GB

Maximum size: 20 GB

But when I go into ubuntu and look in the system monitor, it says that I have a total of 4.2 GB, used 3.7GB and only have 207.5MB free.

This clearly isn't right. What's going on? This basically means my VM is unusable for all intents and purposes.

My host OS is Windows 10.

Thanks

My first "most basic" question was answered perfectly and quickly over in the VSAN section, so now I'll venture over here and ask another!

I admit, this will sound stupid, but here goes: how do I install VCENTER onto a VSAN, when you have to have VCENTER up and running in order to create a VSAN?

Let's assume I have 4 brand spankin' new ESXi hosts with local storage:

1x ssd for ESXi (onboard sata controller)

1x ssd for cache (on LSI controller in pass-thru mode)

3x hdd for capacity (on LSI controller in pass-thru mode)

ESXi 6.02U is installed on each host, each host can see the 4 drives on the LSI card, and I can get logged into each host.

So, we're all setup and ready to go.

Now what? Do I:

• Create a datastore on one ESXi OS drive, install VCENTER on that, create a datacenter, then a vsan-enabled cluster, then a VSAN datastore (by claiming the disks from all 4 hosts), divide it up as necessary, and then migrate the VCENTER server storage to the appropriate VSAN datastore?
• Create a VSAN datastore from the CLI (esxcli vsan cluster new, esxcli vsan storage add -s SSD-DISK-ID -d HDD-DISK-ID), and then install VCENTER on that vsan?
• Or...???

Thanks...I think I should probably know the answer to this, but it eludes me.

Hi every one,

Actually I am using  vSphere Data Protection 6.1.2 to back up our virtual machines and I am experiencing an issue with one VM. The job log begins at 21:30 and at 22:30

shows the first error.

2016-11-11T22:29:26.067+06:00 avvcbimage Info <16041>: VDDK:DISKLIB-LIB   : numIOs = 2950000 numMergedIOs = 0 numSplitIOs = 0

2016-11-11T22:30:04.974+06:00 avvcbimage Info <16041>: VDDK:DISKLIB-LIB   : numIOs = 3000000 numMergedIOs = 0 numSplitIOs = 0

2016-11-11T22:30:10.538+06:00 avvcbimage Info <40654>: isExitOK()=169

2016-11-11T22:30:10.538+06:00 avvcbimage Info <16022>: Cancel detected(externally cancelled by Administrator), isExitOK(0).

2016-11-11T22:30:10.538+06:00 avvcbimage Info <40654>: isExitOK()=169

2016-11-11T22:30:10.538+06:00 avvcbimage Info <16022>: Cancel detected(externally cancelled by Administrator), isExitOK(0).

2016-11-11T22:30:10.538+06:00 avvcbimage Info <9746>: bytes submitted was 197065048064

2016-11-11T22:30:10.540+06:00 avvcbimage Info <9772>: Starting graceful (staged) termination, MCS cancel (wrap-up stage)

2016-11-11T22:30:10.551+06:00 avvcbimage Info <19692>: Cancelled by MCS with timeout=0 sec

2016-11-11T22:30:10.635+06:00 avvcbimage Error <0000>: [IMG0010] pax_container::endfile(virtdisk-flat.vmdk,197065048064) returned problem:24

2016-11-11T22:30:10.638+06:00 avvcbimage Info <0000>: [IMG0010] pax_container::enddir returned problem:24

2016-11-11T22:30:10.638+06:00 avvcbimage Info <40654>: isExitOK()=169

2016-11-11T22:30:10.638+06:00 avvcbimage Info <16022>: Cancel detected(externally cancelled by Administrator), isExitOK(0).

2016-11-11T22:30:10.638+06:00 avvcbimage Info <12032>: backup ([Silverxxx] server-xxx/server-xxx_2.vmdk) terminated 307200.00 MB

2016-11-11T22:30:10.638+06:00 avvcbimage Info <40654>: isExitOK()=169

2016-11-11T22:30:10.638+06:00 avvcbimage Error <0000>: [IMG1003] Backup of [Silverxxx] server-xxx/server-xxx.vmdk failed

2016-11-11T22:30:10.650+06:00 avvcbimage Info <16041>: VDDK:VixDiskLib: VixDiskLib_Close: Close disk.

2016-11-11T22:30:16.162+06:00 avvcbimage Info <6688>: Process 15025 (/usr/local/avamarclient/bin/avtar) finished (code 163: externally cancelled)

2016-11-11T22:30:16.162+06:00 avvcbimage Warning <6690>: CTL workorder "Servers xxx-Servers xxx-1478925000009" non-zero exit status 'code 163: externally cancelled'

2016-11-11T22:30:26.464+06:00 avvcbimage Info <9679>: Virtual disk connection to '[Silverxxx] server-xxx/server-xxx_2.vmdk' has been closed

2016-11-11T22:30:26.464+06:00 avvcbimage Info <40654>: isExitOK()=169

2016-11-11T22:30:26.464+06:00 avvcbimage Info <16022>: Cancel detected(externally cancelled by Administrator), isExitOK(0).

2016-11-11T22:30:26.464+06:00 avvcbimage Info <16052>: Terminating backup of all remaining virtual disks

2016-11-11T22:30:26.464+06:00 avvcbimage Info <16041>: VDDK:VixDiskLib: VixDiskLib_Disconnect: Disconnect.

2016-11-11T22:30:26.487+06:00 avvcbimage Info <16041>: VDDK:VixDiskLib: VixDiskLib_Cleanup: Remove previous mount points and clean up .

2016-11-11T22:30:26.487+06:00 avvcbimage Info <16041>: VDDK:VixDiskLib: VixDiskLib_Connect: Establish connection.

2016-11-11T22:30:26.487+06:00 avvcbimage Info <16041>: VDDK:VixDiskLib: Resolve host.

2016-11-11T22:30:26.488+06:00 avvcbimage Info <16041>: VDDK:MemoryDbMappingsExpire: Expiring SSL ID mapping, hostname 192.168.0.xxx SSL ID 0d:d5:20:4d:8f:41:4c:f9:c5:ab:ff:2b:b0:e2:e7:18:dc:c7

2016-11-11T22:30:26.488+06:00 avvcbimage Info <16041>: VDDK:MemoryDbMappingsExpire: Expiring SSL ID mapping, hostname 192.168.1.xxx SSL ID 4e:89:f7:1d:b2:d4:81:96:b3:f4:04:20:56:a4:1d:ff:e4:a1

2016-11-11T22:30:26.703+06:00 avvcbimage Info <16041>: VDDK:VixDiskLib: VixDiskLib_Disconnect: Disconnect.

2016-11-11T22:30:26.703+06:00 avvcbimage Info <9672>: Disconnected from VM

2016-11-11T22:30:26.703+06:00 avvcbimage Info <8701>: Closing pax stream

2016-11-11T22:30:26.730+06:00 avvcbimage Info <40645>: getActiveTaskCount prior to snapshot removal: CreateSnapshot=0 RemoveSnapshot=0 ImageTask=0 otherTask=0

2016-11-11T22:30:26.740+06:00 avvcbimage Info <41147>: no active snapshot removal tasks for vm moref 'vm-169'

2016-11-11T22:30:26.740+06:00 avvcbimage Info <14642>: Deleting the snapshot 'VDP-14789250258070daefa9130627093324fe5670a559235298f8', moref 'snapshot-1352'

2016-11-11T22:30:26.740+06:00 avvcbimage Info <0000>: SnapshotManager: deletesnapshot, snapshot-1352

2016-11-11T22:30:26.740+06:00 avvcbimage Info <0000>: SnapshotManager: POST to /snapshotmanager/snapshot/snapshot-1352/action/delete, payload({

  "maxAttempts": -1})

2016-11-11T22:30:27.133+06:00 avvcbimage Info <0000>: AvSnapMgr::postData Succeeded

2016-11-11T22:30:27.133+06:00 avvcbimage Info <0000>: POST: curl_easy_getinfo - passed. HTTPCode: 202

2016-11-11T22:30:27.133+06:00 avvcbimage Info <0000>: AvSnapMgr::postData Succeeded

2016-11-11T22:30:27.133+06:00 avvcbimage Info <0000>: avSnapMgr::deleteSnapshot returned: HTTP/1.1 202 Accepted

Location: https://127.0.0.1:8543/snapshotmanager/task/task-8813

Content-Length: 0

Date: Sat, 12 Nov 2016 05:30:27 GMT

Connection: close

Server: Avamar

...

...

...

2016-11-11T21:30:46.003+06:00 avtar Info <5946>: File system character encoding is UTF-8.

2016-11-11T21:30:46.003+06:00 avtar Info <5588>: - Creating process lock file "/usr/local/avamarclient/var/VmImage7_avtar.lck", pid=15025

2016-11-11T21:30:46.004+06:00 avtar Info <8940>: Starting back up at 2016-11-11 21:30:46 MST as "root" on "dpxxx" (4 CPUs) [7.2.180-98]

2016-11-11T21:30:46.004+06:00 avtar Info <5731>: Not using include/exclude list

2016-11-11T21:30:46.004+06:00 avtar Info <8474>: - Log file path: Servers xxx-1478925000009-8070daefa9130627093324fe5670a559235298f8-3016-vmimagew_avtar.log

2016-11-11T21:30:46.004+06:00 avtar Info <6555>: Initializing connection

2016-11-11T21:30:46.004+06:00 avtar Info <5552>: Connecting to Avamar Server (dpxxx.xxx.corp)

2016-11-11T21:30:46.004+06:00 avtar Info <5554>: Connecting to one node in each datacenter

2016-11-11T21:30:46.040+06:00 avtar Info <5993>: - Connect: Connected to 192.168.1.160:29000, Priv=0, SSL Cipher=ECDHE-RSA-AES256-GCM-SHA384

2016-11-11T21:30:46.075+06:00 avtar Info <5993>: - Datacenter 0 has 1 nodes: Connected to 192.168.1.160:29000, Priv=0, SSL Cipher=ECDHE-RSA-AES256-GCM-SHA384

2016-11-11T21:30:46.080+06:00 avtar Info <5581>: Logging in on connection 0 with Session Ticket

2016-11-11T21:30:46.080+06:00 avtar Info <5582>: Avamar Server login successful

2016-11-11T21:30:46.080+06:00 avtar Info <5018>: - Session ID: 0

2016-11-11T21:30:46.083+06:00 avtar Info <10632>: Using Client-ID='8070daefa9130627093324fe5670a559235298f8'

2016-11-11T21:30:46.083+06:00 avtar Info <5550>: Successfully logged into Avamar Server [7.2.80-98] (Compression enabled)

2016-11-11T21:30:46.083+06:00 avtar Info <7562>: Back up of stdin on server "dpxxx.xxx.corp" for /vcxxx.xxx.corp/VirtualMachines/server-xxx_UB0KAkp4C8r7ismoqsJ0pw

2016-11-11T21:30:46.096+06:00 avtar Info <5586>: Loading cache files from /usr/local/avamarclient/var

2016-11-11T21:30:46.096+06:00 avtar Info <5769>: Filecache is disabled.

2016-11-11T21:30:46.096+06:00 avtar Info <8650>: Opening hash cache file '/usr/local/avamarclient/var/VmImage7_p_cache.dat'

2016-11-11T21:30:48.097+06:00 avtar Info <5573>: - Loaded hash cache file (25,166,368 bytes)

2016-11-11T21:30:48.218+06:00 avtar Info <6426>: Done loading cache files

2016-11-11T21:30:48.219+06:00 avtar Warning <18692>: Changed streamformat-out to none since raw format is only for DDR use

2016-11-11T21:30:48.219+06:00 avtar Info <6995>: Parsing 'pax' stream format from stdin

2016-11-11T21:30:48.219+06:00 avtar Info <10818>: Backstream creating root backstreamdir object

2016-11-11T21:30:48.219+06:00 avtar Info <8648>: Directory elements will be sorted: No

2016-11-11T21:30:48.219+06:00 avtar Info <8649>: Sub-file change blocks enabled: No

2016-11-11T21:45:47.229+06:00 avtar Info <8688>: Status 2016-11-11 21:45:47, 9 files, 84.77 GB (9 files, 87.32 MB, 0.10% new) 393MB  81% CPU  91026768896 input bytes, (1 open files) VMFiles/2/virtdisk-flat.vmdk

2016-11-11T22:00:49.034+06:00 avtar Info <8688>: Status 2016-11-11 22:00:49, 12 files, 192.7 GB (12 files, 88.32 MB, 0.04% new) 393MB  93% CPU  206948698112 input bytes, (1 open files) VMFiles/3/virtdisk-flat.vmdk

2016-11-11T22:13:08.645+06:00 avtar Info <5286>: 2016-11-11 22:13:08 MST: Increasing size of hash cache from 1048576 to 2097152 elements (adding 25,165,824 bytes).

2016-11-11T22:13:09.139+06:00 avtar Info <5069>: - Writing cache file "/usr/local/avamarclient/var/VmImage7_p_cache.dat"

2016-11-11T22:13:09.385+06:00 avtar Info <5546>: Cache update complete /usr/local/avamarclient/var/VmImage7_p_cache.dat (48.0 MiB of 618 MiB max)

2016-11-11T22:13:09.385+06:00 avtar Info <5122>: 2016-11-11 22:13:09 MST: Cache resize complete.

2016-11-11T22:15:50.037+06:00 avtar Info <8688>: Status 2016-11-11 22:15:50, 12 files, 260.0 GB (12 files, 88.33 MB, 0.03% new) 417MB  92% CPU  279142500352 input bytes, (1 open files) VMFiles/3/virtdisk-flat.vmdk

2016-11-11T22:30:10.584+06:00 avtar Info <7061>: Canceled by '3016-vmimagew' - exiting...

2016-11-11T22:30:10.620+06:00 avtar Info <9772>: Starting graceful (staged) termination, cancel request (wrap-up stage)

2016-11-11T22:30:15.703+06:00 [avtar]  ERROR: <0001> backstreamdir::childdone error merging history stream data during phase_do_hidden while processing directory 'VMFiles/3'

2016-11-11T22:30:15.764+06:00 [avtar]  ERROR: <0001> backstreamdir::childdone error merging history stream data during phase_do_hidden while processing directory 'VMFiles'

2016-11-11T22:30:15.833+06:00 avtar Info <7202>: Backup CANCELED, wrapping-up session with Server

2016-11-11T22:30:15.972+06:00 [avtar]  ERROR: <0001> backstreamdir::childdone error merging history stream data during phase_do_hidden while processing directory ''

2016-11-11T22:30:16.028+06:00 avtar Info <7238>: Stream complete: 347,389,067,264 bytes read from stream

2016-11-11T22:30:16.029+06:00 avtar Info <5157>: PARTIAL Backup #51 timestamp 2016-11-11 22:30:16, 15 files, 5 directories, 323.5 GB (15 files, 88.66 MB, 0.03% new)

2016-11-11T22:30:16.029+06:00 avtar Info <7539>: Label "Servidores Pruebas-Servidores Pruebas-1478925000009", scheduled to expire after 11/18/16 (2016-11-19 05:30:16 UTC), daily backup, backup type: level0_full

2016-11-11T22:30:16.029+06:00 avtar Info <6083>: Backed-up 323.5 GB in 59.50 minutes: 326 GB/hour (15 files/hour)

2016-11-11T22:30:16.031+06:00 avtar Info <7883>: Finished at 2016-11-11 22:30:16 MST, Elapsed time: 0000h:59m:30s

2016-11-11T22:30:16.075+06:00 avtar Info <6149>: Error summary: 3 errors: 1(3)

2016-11-11T22:30:16.075+06:00 avtar Info <8468>: Sending wrapup message to parent

2016-11-11T22:30:16.077+06:00 avtar Info <5314>: Command failed (3 errors, 1 warning, exit code 10013: externally cancelled)

--------------------------------------------------------------------------------------------------------

----- END avtar log 2016-11-11 22:30:16 MST  (1 warning, 3 erros, 0 fatal errors)

--------------------------------------------------------------------------------------------------------

When I google the error message It always shows something related to the backup duration more than a day but in this case it only takes 2 hours.

Regards,

Hi everyone,

I hope you are well today.

As you know last month a security update (v16.00) was made available for 7-Zip:

http://blog.talosintel.com/2016/05/multiple-7-zip-vulnerabilities.html

I have VMware Workstation 12.1.1 installed but it still has version 9.20 of 7za.exe installed located at the following directory path: C:\Program Files (x86)\VMware

Is VMware affected by the issues raised in the above mentioned blog post? If so, is this older .exe file likely to be replaced in an upcoming update to VMware?

Apologies if the appropriate actions for updating this file in a future update are already in progress. Many thanks in advance for your time. Have a good day.

Does anyone know what would cause the SAME user to login into multiples sessions even though we don't allow multiple logins in our View environment?

Currently we have thin clients which are domain joined and when the user log in it is then automatically logged into virtual desktop.

Is it possible to configure Horizon client in a way that when you do logout from VDI that you are also logged out from TC ? And similar if user locks VDI trough start menu that the client also locks ?

What is otherwise the best option to configure Windows thin clients to work seamlessly with horizon and without any local desktop ? Especially when users are using ctr-alt-del key combination or doing lock/logoff. Zero clients are really nice here and give you the best local desktop experience, but they lack on other areas.

Tnx

Will storage vmotion work while moving VMs from ESXi 5.0 datastore cluster to new ESXi 6.0 hosts datastore cluster : without powering off the VMs ?

I am assuming that i am running Vcenter 6 with all these ESXi 5.0 and ESXi 6.0 hosts in the same hosts cluster.

Hello,

Please i have a problem to do a vMotion from host "Rack" (ESXI 5.0, VM version 8, VMFS 5.54) to LAME BLASE server (ESXI 6.0, VM version 11, VMFS 5.61). I added the Rack host to the vCenter and tried to migrate a VM test but got the error message:

The virtual machine requires hardware features that are unsupported or disabled on the target host: """""""""""""* General incompatibilities "
If possible, use a cluster with Enhanced vMotion Compatibility (EVC) enabled; see KB article 1003212.
CPUID details: incompatibility at level 0x1 register 'ecx'.
Host bits: 0110:0010:1101:1000:0011:0010:0000:0011
Required: x000:x01x:10x1:1xx0:xx10:xx1x:xx0x:xx11

It seems incompatible VM hardware, as solution we need to download and install the right VM harware to perform the migration, i'm investigate this issue.

It was a CPU problem version, i enabled the EVC by adding the source host to a new cluster with EVC enabled https://www.youtube.com/watch?v=DSfzafr1ndA an now i don't have the above error message but another error message:

You cannot change the virtual machine's storage placement and its execution host at the same time on this "Source" host 'xxx.yyy.zzz.www'.

I tried to do only storage vMotion or resource vMotion but i see only the source host not the destination host !

Can someone helps me please !

Regards.