hi all
there is a doubt of the vxlan settings for cluters that,
I have two clusters, cluster A with vlan tag 123 and cluster B is using native vlan 0(still the vlan 123) as the switch infrastructure
only this vlan is utilized for my datacenter
(the virtual distributed switch also configured with a portgroup with vlan tag 123 for the cluster A,
and a portgroup with native vlan for cluster B)
the problem occurred when i was installing NSX for the datacenter,
i set the vxlan config. with vlan id 123 for cluster A and worked fine but...
when configuring cluster B's vxlan config. i set the vlan id into 0 (for native vlan),
the windows popped up error messages prevent me from finishing the vxlan setting:
"VLAN 0 can not be used. Other VLAN IDs are in use on the specified VDS"
does this mean my clusters infrastructure need to use same vlan configuration?
(i.e. all use same vlan tag or all use same native vlan 0)
or I just only need to configure vlan id into 123 for vxlan networking in cluster B to solve this error message?
won't that be any conflict on VDS?
thanks in advance